So If I got this correctly, I have to increase the hammer tension on the back to the MAX it will go to max out the gun yes? But if the regulator is set to 140 bar, what will this even do? Won't I just be losing air and gaining no fps?
Quote from: DarkRattle on March 24, 2017, 04:06:48 PMSo If I got this correctly, I have to increase the hammer tension on the back to the MAX it will go to max out the gun yes? But if the regulator is set to 140 bar, what will this even do? Won't I just be losing air and gaining no fps?Excellent question.It seems to me that no matter how hard the hammer hits, you're going to get 140 bar.You would have to adjust the regulator to about 150 bar and leave the Hammer spring alone.That's what it seems like to me. Anyway im sure someone will come along and point out how wrong I am.You're going to lose shot count.
So I realized it takes a 5mm hex key and I inserted it and put a bit of pressure and saw it wasn't moving and slowly but swirly felt the screw starting to strip so I immediately stopped, cmon fx :/
So If I got this correctly, I have to increase the hammer tension on the back to the MAX it will go to max out the gun yes? But if the regulator is set to 140 bar, what will this even do? Won't I just be losing air and gaining no fps? Right now I'm getting around 44.5 fpe with 25 grain JSBs shooting 890 fps, I'm trying to get around 920 fps. Thanks What size allen key btw?