I'm anxiously waiting for my M10 to arrive today, I also ordered the pistol.These look like great project rifles, or super powered .22 if left stock.I started off with the Darkside of airguns, I can't believe I went this long without ordering one.
So I got the M10 now. And inmedietly inboxed it at tryied to pump it with air but nothing the fill prove was leaking.I changed the o rings with the spare orings that came with the gun but nothing. Still leaking What size o ring does the fill probe uses?
Quote from: eezapz2101 on March 30, 2017, 03:53:07 AMSo I got the M10 now. And inmedietly inboxed it at tryied to pump it with air but nothing the fill prove was leaking.I changed the o rings with the spare orings that came with the gun but nothing. Still leaking What size o ring does the fill probe uses?I went through something like that, I thought the fill probe was leaking but it was the fill assembly itself leaking. I unscrewed it from the front of the air tube, replace the o-ring and silicon greased it, and put a wrap of yellow Teflon tape on the threads for good measure. Put it back together and Tada! Leak free gun fills fine.
I'm not trying to insult your intelligence, I just don't know if you've been around PCPs much....You know that the o-rings should have a little silicon grease on them to help the seal?
another thing my m10 came with a sear and a brass piece what is that for? can anyone tell me?i thought i was supouse to get a high and low power tunning components but i did not get them just the sear and a bras fitting of some sort.what are the hi and low power components i was suppoused to get?
Quote from: eezapz2101 on March 30, 2017, 05:45:05 PManother thing my m10 came with a sear and a brass piece what is that for? can anyone tell me?i thought i was supouse to get a high and low power tunning components but i did not get them just the sear and a bras fitting of some sort.what are the hi and low power components i was suppoused to get?If you take a look at the round brass piece, you will see that this plugs into the breech where the pellet goes into the back of the barrel. You can see that this part has a hole through the middle, but there is another hole that goes from the outside edge and intersects the middle hole. This is effectively the transfer port, it lets air pass from the valve up into the barrel. The spare has a smaller transfer port hole than the one mounted in the gun, so it is the "low power" transfer port. Be aware that even the "low Power" one is capable of a LOT of power, like 40fpe-ish.