91
Air Gun Gate / Re: What airgun related did you do today?« Last post by avator on Today at 08:20:30 AM »Yeah, I've already set my mind to pulling that tank and flushing it today. It's only 2 bolts holding it in. I have a new inline filter for it. Think I'll replace the air filter while I'm at it. We have a Husqvarna dealer right here in town.I may play it safe and just borrow a couple goats from workdidn't get to do anything air gun related, my mower seized up after I did an oil change, found out that the Governor shaft had broken, I was wondering why sometimes it would start up and be wide open throttle, broken governor shaft is pinned in the crank keeping the piston from moving, I did see small pieces of metal in the oil... Just my Luck..... good thing it's under Warranty.... .It must be going around... fortunately mine was just a plugged fuel filter. But now I am compelled to flush out the fuel tank. As for airguns.... maybe some jumpers today. 92
Air Gun Gate / Re: So.....what did you shoot today?« Last post by Spacebus on Today at 08:20:00 AM »Wing Shot .5 oz load #7 Bismuth shot 20 yard pattern, Waiting on tungsten #9 Is there a better source on shells for these now? I always liked the idea of getting one tuned by CAP, but the single use shells turn me off. It's way cheaper to just shoot PB shotguns. 93
Air Gun Gate / Re: So.....what did you shoot today?« Last post by Spacebus on Today at 08:18:36 AM »Now that the compressor is online I've been absolutely blasting targets with my air rifles. I've dusted off my 177, 22, and 25 cal rifles, now to get the 45 cal out!
94
Back Room / Re: So if you didn't do anything airgun related what did you do today?« Last post by avator on Today at 08:16:09 AM »I was trimming a shrub with my brand new 24" battery hedge trimmer and I fell off the ladder. I was on the 3rd step and the ground wasn't level but having worked off of ladders for many years I thought I would be alright. Wrong.What don't kill you makes you.... that's BS, what don't kill you just hurts alot more. 95
Back Room / Re: So if you didn't do anything airgun related what did you do today?« Last post by maraudinglizard on Today at 08:13:50 AM »I was trimming a shrub with my brand new 24" battery hedge trimmer and I fell off the ladder. I was on the 3rd step and the ground wasn't level but having worked off of ladders for many years I thought I would be alright. Wrong. At least you didn't break a body part. You know they do make cordless pole hedge trimmers. I use a cordless pole pruner for the jungle I have. Way much safer to use than being on a ladder. You are right about one thing, lawns will kill you. https://www.lowes.com/pd/CRAFTSMAN-20-Volt-Max-18-in-Dual-Cordless-Electric-Hedge-Trimmer-1-Batteries-Included/1001459490 96
Air Gun Gate / Re: What airgun related did you do today?« Last post by Back_Roads on Today at 08:11:25 AM »I may play it safe and just borrow a couple goats from workdidn't get to do anything air gun related, my mower seized up after I did an oil change, found out that the Governor shaft had broken, I was wondering why sometimes it would start up and be wide open throttle, broken governor shaft is pinned in the crank keeping the piston from moving, I did see small pieces of metal in the oil... Just my Luck..... good thing it's under Warranty.... .It must be going around... fortunately mine was just a plugged fuel filter. But now I am compelled to flush out the fuel tank. PS got more trigger time with the FX DRS 97
Pellets all calibers / Re: JSB 25.39gr 22 cal pellets« Last post by Back_Roads on Today at 08:08:01 AM »Totally confused. What is the difference between the four 25.39gr pellet tins available from Pyramyd Air. 1) Exact Jumbo Monster 2) Redesigned Monster 3) Redesigned Exact Jumbo Monster Shallow Skirt & 4) Redesigned Exact Jumbo Monster Deep Skirt. All weigh 25.39gr, but have different names. Is any one of these a standout for a powerful PCP like the RAW HM1000x?I think you may be looking at the offerings in different calibers. As they offer some .22 cal. in .25 weights Head size would be the only difference if same cal. and weight. Then again it has been a couple months since I shopped for pellets 98
Support Equipment For PCP/HPA/CO2 / Re: HPA compressors« Last post by avator on Today at 08:06:52 AM »I also have a question...Here is what I did to mine.. Does the power supply not need pass through ventilation? Does mounting like that block the air flow through it? I reckon I need to have a closer look at mine. I think I would like to mount it on the case like you did. 99
Crosman-Benjamin Air Gun Gate / Re: Legacy 362 ?« Last post by avator on Today at 08:03:35 AM »Is it not a rear position screw? You may have to pull the bolt out to reveal it.
100
Crosman-Benjamin Air Gun Gate / Re: Legacy 362 ?« Last post by Back_Roads on Today at 07:47:41 AM »One thing surprised me about this gun. The breech and barrel are not connected in the usual way. No breech screw showing under the bolt.LOL now I am going to have to shoot mine once, and see, may be the Maximus style |