Hey longhunter,The stock on the Striker 1000x is not inletted large enough for the 125. The 125, like the 135 both have larger diameter receivers and wouldn't fit unless they were made larger using a Router or Shaper. If you did that; however, the top edges of the stock might be too narrow and look funny The trigger to receiver distance maybe different too?Plus, don't let the stock fool you, this is not Turkish Walnut, but some very light weight (almost white) wood stained perfectly by Hatsan.If you want a wood stock for your 125, the "Stock Guy" on the GTA Mall was going to rough out (all inletting) a lower grade piece of walnut for $100 + for my Bam 50. This seems like a very good alternative for a Cowboy like you gonna have to look into that. thanks for the heads up .Kirk
i'm trying to get a wood stock to replace my syn stock that cracked.i filled out 2 Customer Service Forms that said they were sent no reply from hatsanusa.com.funny thing is ricks freakin voice is all over the answering machine for hatsanusa.com
Hey Guys,Hatsan USA's email address is service@hatsanusa.com.I filled out and submitted the web forms and then just followed up with Rick.You usually here from Hatsan USA the day after you email Rick.Good Luck................ .