I'm just wondering...Have You guys who has Recluse never tried that Lee's 105 SWC mold? Here I have few friends who has Recluse and they are telling that bullet is very accurate in Recluse.. And those bullet diameters...Is there different Sam Yang's in USA..Here Finland all .45 Sam Yang's which is bought before factory do those 500cc airtubes use .457 bullets and that diameter works best. I've been told those new 500cc airtube guns at .45 are different diameter.. at least here. Well all Sam Yang's shoot roundball well... .360 .457 and .500
460/195gr pure lead bullet from a mold from accurate,
460 is the diameter of the bullet mold,and as i stated i use pure lead, no wheel weights,no tin added, and they work just fine, i don't size my bullets,i tried that and accuracy suffered for me, my 909s is a older one that is power tuned, my twin tube is 2015 and it's all stock for now,i have not slugged my barrel,s,i have 454 bullets i bought for my evanix sniper,that i have since sold, and they were not as powerful, or as accurate as my 457 and 460 bullets nor did they seat the same,it is what it is brother,i don't jam my bullets deep in the barrel,i just push till snug ,with 1/2 the bullet or more still in the chamber,only round balls fit to the end of the barrel,same way with the 357 shin sung, which i shoot 360 / bullets and balls,might just be the pure lead,don't know, don't care how it work,s only that it does, and i am thankful for that,
Well if I need to choose again I still take .45 I own one and it is tuned to shoot 214grain bullet 780 FPS packing 393 J. There is more bullets which shoots well than .357 or .50 has. That .50 is quite slack, that would be my last choice. I had .357 with 500cc airtube and that was also tuned and it shots 134gr bullet 880FPS packing 312 J. There is quite accurate bullet on that .357 it is Lee's 105 grain SWC or same mold is also accurate molds list if needed better quality mold