I was thinking more in the line of a one piece stock, like the ones from woods and waters, for the 13xx-22xx series guns.mine seems to have potential. it isn't broken in, yet, but, it will put more than one pellet in roughly the same hole. just not consistently. I can attribute that to the shooter. I did manage to get one group that was just over 1/2", though. the first three things I did to mine was to totally disassemble the gun, polish and relube everything, including the trigger sears, did the longer screw mod to the trigger, and mount a red dot.
Quote from: longhunter on December 16, 2015, 07:38:36 AMI was thinking more in the line of a one piece stock, like the ones from woods and waters, for the 13xx-22xx series guns.mine seems to have potential. it isn't broken in, yet, but, it will put more than one pellet in roughly the same hole. just not consistently. I can attribute that to the shooter. I did manage to get one group that was just over 1/2", though. the first three things I did to mine was to totally disassemble the gun, polish and relube everything, including the trigger sears, did the longer screw mod to the trigger, and mount a red dot.Just a little tune up to try squeezing the 2nd sear spring together a little bit, if you over do it won't engage and you will have to spread it back out a bit. Get it right and it will sure lighten the pull if you don't like a light pull this is probably not for you. Give it a try you might like it.Darrell