Hi guys. I just put a leapers 6x24 scope 50mm lense on my Benji Marauder 22 using leapers high scope rings. When I went to sight it in mounted screws to the left couldn't close maybe 4 in low and 3 in left. I turned the mounts around then I ran out of adjustment at about 2.5 in low and 1 in right. from what I can tell a medium mount is to close to use the scope. unless someone knows of a better fix. please Help.Ok sorry to bother I discovered that if, I put the lugs on opposite sides of the gun then it was on correctly, the only issue is that the front ring bolts must be on the shooters left side while aiming the gun. Add air and all is well.
First, I would rezero the scope itself using a mirror, then try screwin with the mounts.
ok guys thanks for the input. Bottom line the mounts did not allow for centering the scope on the rifle. but I got it . now rings in route.