GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Dakota on March 21, 2014, 03:18:38 PM
-
Well I got my airforce pump in yesterday and it was not so bad taking it to 2000 psi for the first Disco and it took me almost twice as long for the second Disco I pumped it up to 2000 psi and about 4 hours later it was down to 1000 psi thinking maybe I didn't pump it all the way up so I did it again and I checked it this morning and it is back down to 1000 psi, so ? ? ? ? ?
Any help at this point would be good, I check the gauge and the fill adapter seem good to me?
Marty
-
you can use a solution of dishwasher soap and water to check for bubbles from around the gauge and fill. can also put a balloon over the end to see if it is leaking there. another thought is to leave it cocked (and unloaded) to see if that is causing a leak.
-
Thanks Goff I found it leaking from the seal at the Breach
-
Good deal. Going to take care of it yourself or send it back ?
-
its fixed I have a hard time sending anything back. LOL