Author Topic: CBR trigger for Crosman/Remington NPSS guns and more (Read 3260 times)

CharlieDaTuna · « **on:** July 30, 2011, 10:12:38 AM »

I get a lot of e-mails (trying to reduce my e-mail load)

from many of our members regarding/requesting information for the Crosman and Remington NPSS guns and asking if there is a trigger available for those guns.

The answer is yes and all of the information is available on the website.

The CBR trigger blade is the solution for those guns and greatly improves the trigger pull length and pull weight. The CBR trigger also applies to the Remington Genesis and Remington Legacy springers that has the plastic trigger as well as some of the late model Phantoms..

Clicking the website link below should answer any questions that you may have regarding the CRB trigger blade and provides the CBR trigger gun applications as well as other information.

http://www.charliedatuna.com/NPSS%20non%20PP.htm

Thanks all

CDT

Rickey · « **Reply #1 on:** July 30, 2011, 11:51:55 AM »

Got your trigger for my All Weather .22 and love it. Thanks Rickey

gene_sc · « **Reply #2 on:** July 30, 2011, 10:40:51 PM »

One of CDT's latest trigger for the Remington and Crosman NPSS Gas Rams is the CBR trigger. This trigger I cannot say enough good about. It definetly has that two stage feel and a crispy break. I have intsalled it in both my NPSS gas rams and am as happy as a pig in dung over the results.

Check it out:
http://www.charliedatuna.com/NPSS%20non%20PP.htm

RebelsWingman · « **Reply #3 on:** August 19, 2011, 05:06:39 PM »

Excellent trigger Bob! I didn't know $29 could make that much difference.

fr33z3rburn · « **Reply #4 on:** October 03, 2011, 03:37:14 PM »

I'll throw my hat in this ring as well. I installed one of these in my camo Remington NPSS, and it made a world of difference. Every air rifle I own that can fit it has a Tuna trigger in it!

junkyspace · « **Reply #5 on:** October 23, 2011, 02:00:11 PM »

Ridiculously good. Ya got my vote

http://www.gatewaytoairguns.org/GTA/index.php/topic,19855.0.html

microsalmo · « **Reply #6 on:** November 22, 2011, 12:52:03 PM »

made my npss shoot like a dream - thank you!

Tradewell · « **Reply #7 on:** November 26, 2011, 11:46:02 PM »

Hi there, I am new to this forum but not to Charlie Da Tuna as I recently purchased a GRT III for a Gamo Shadow and what a great feel it has now. Great two stage action. So thanks for that but now I have a dilemma. I have just purchased a Remington NPSS and WANT the CBR Trigger but the website says not available outside U.S. Any chance of making it available outside U.S. I certainly had no problems with previous mailout.

PaperPunch1 · « **Reply #8 on:** December 10, 2011, 01:14:06 PM »

I have the NP hardwood (not xl) and bought a trigger for it right after shooting twelve shots with it when new.
The different trigger makes it like a different rifle! Now the rifle groups much tighter than before. Had no trouble at all with it being too light.
PaperPunch1

Muppit · « **Reply #9 on:** December 10, 2011, 07:01:15 PM »

well worth my money great improvement over stack one

ddavid · « **Reply #10 on:** December 12, 2011, 12:13:54 AM »

Is there any way to order a GRT III trigger without doing the whole money order thing?? Do any sites sell them that take Visa or PayPal or something electronic?

CharlieDaTuna · « **Reply #11 on:** December 12, 2011, 11:57:17 AM »

There is no other way than as per the website and it can only be ordered through the website.

CDT

Randy · « **Reply #12 on:** December 17, 2011, 04:37:01 PM »

Just installed one in my .22 Remington NPSS and I love it, makes it nice and smooth.

Jasonintn · « **Reply #13 on:** December 31, 2011, 03:46:23 PM »

I am thinking of one of these. The money order thing is the only thing stopping me. Paypay or credit card would make it a snap. Any way to do this at all. Thanks

Jason

CharlieDaTuna · « **Reply #14 on:** December 31, 2011, 05:57:06 PM »

That is the only way.

CDT

Jasonintn · « **Reply #15 on:** December 31, 2011, 06:13:52 PM »

Ok thanks. May order one a little later.

Jason

microsalmo · « **Reply #16 on:** January 03, 2012, 11:10:22 PM »

i sent cash on my last two tuna-triggers in November - worked like a charm

gene_sc · « **Reply #17 on:** January 03, 2012, 11:14:11 PM »

If I am not mistaken Bob still takes cash. But check his web site first.

Quote from: Jasonintn on December 31, 2011, 03:46:23 PM

I am thinking of one of these. The money order thing is the only thing stopping me. Paypay or credit card would make it a snap. Any way to do this at all. Thanks

Jason

mpapiary · « **Reply #18 on:** January 09, 2012, 07:11:09 PM »

Received my trigger, looked at the installation directions and took 15 minutes to install into my NP Trail. Made a very minor adjustment on the 2nd stage. This gun really shoots now! Definetly a cheap and easy fix to my one real issue with the Trail.

Joex177 · « **Reply #19 on:** January 10, 2012, 04:47:42 PM »

Hey Bob, got your trigger installed on my Benji NP 177 trail. Install was a breeze. I started breaking it in to where I had sub 2" groups with 10ish gr ammo @50 ft. Ammo that weighed less than 8 grains just corkscrews out of the barrel. The rifle has about 1,000 rounds through it and I'm lucky if i can get a 12" group @ 15 yds.

I've tried all the basic trouble shooting. The gun does not want to shoot straight. Any Ideas? Joe

Author Topic: CBR trigger for Crosman/Remington NPSS guns and more (Read 3260 times)

RebelsWingman

fr33z3rburn

Tradewell

ddavid

Jasonintn

Jasonintn

Joex177